2102 JINGRUN EDIFICE,ZHONGSHAN WEST ROAD,JIAXING,ZHEJIANG | chenxi_zhuxi@163.com |
CERTIFICATE OF QUALITY
1. Mechanical Properties
These drive pins are manufactured from C-1060 steel and austempered to a core hardness of HRC 52to 56. To insure ductility, these drive pins are bend tested during Quality Control inspection to about 60 degrees.
2. Corrosion Resistance:
These drive pins are designed to be used in a non-corrosive atmosphere unless application specific corrosion testing has been performed. The standard for this drive pin is applied zinc meeting the international requirement providing an average thickness of ≥0.005 mm with no supplementary coating.
3. Shoot Test:
These drive pins received the acceptance inspection by shoot with PT-450 tool for penetrating A3 steel plate of 8mm thickness.
Contact Person: Mr. ZHU
Tel: +86-13484111573
M1/4" Powder Actuated Fasteners For Structural Steel / Power Driven Fasteners
Steel Powder Actuated Fasteners M1/4"-14UNC Thread Drive Pins With Cap
High Velocity Powder Actuated Fasteners For Steel M1/4"-17UNC Power Driven Fasteners
Head Drive Powers Drive Pins Stainless Steel Drive Pins 10mm Washer Dia
Pdw Steel Washer Powers Drive Pins Powder Driven Fasteners 7.60mm Head Dia
Small Stainless Steel Drive Pins Dn Head With Right Angle 27-32 Mm Length
.27 Cal Powder Actuated Loads S1jl 6.8x11mm Strip Powder Loads Customized Color
27 Cal Nail Gun Shooting Blanks S3 6.8x18 Direct Fastening Technology
Strong Red Powder Actuated Tool Loads Dewalt Powder Loads S1jl 6.8x11mm